Automatic Peanut Coating Machine|Commercial Coated Peanut Coating
The Introduction of Commercial Peanut Coating Machine
This kind of commercial peanut coating machine is mainly used for
making the peanut coating machine with the highly quality,our
peanut coating machine also could used in many ways,the material of
ur peanut coating machine is stainless steel.
The Features of Automatic Peanut Coating Machine
The feature of the peanut wrapper is that the angle of inclination
of the roller pan is 45 degrees, and the inner wall of the
cylindrical drum type rolling pan is smooth, which can be used not
only for the production of peanuts. Can also be used for
diamond-shaped, square material of the coat.
The Working Principle of Peanut Coating Machine
The peanut coating machine is composed of a rolling pan body, a
frame, a transmission system, etc. The pot body adopts a cylinder
barrel or a variable barrel type, which is suitable for the coating
operation of granular materials. The drive system reduces the speed
to an easy-to-operate speed through the cooperation of a motor and
a speed reducer. The equipped inverter can adjust the speed of the
roller pan within a certain range. Using the centrifugal force
generated by the rotation of the roller pan, the material is
rotated and thrown off when it reaches the upper part of the roller
pan, and the sticking powder is wrapped on the material together
with the viscous liquid.
The Operation and Maintance of Flour Coated Peanut Coating Machine
Fix the device to a suitable position, according to the operator's
operating habits, determine the direction of rotation of the pan,
generally choose to rotate clockwise. All other transmissions and
heating systems can be used in production.
According to the actual needs of the process operation can be
produced, the following recommended process of coating peanuts.
Configure the slushing and heat preservation to be used, and rotate
the pan to prevent the syrup sticking pan from rubbing a little
cooking oil on the pan. Put the material into the pan body,
sprinkle some flour and sprinkle the evenly prepared slush.
Sprinkle 2-3 scoops on the material. Then sprinkle the powder and
sprinkle the slurry. Always reach the desired thickness. Then
continue to rotate the rolling pan until the surface is smooth.
After each use of the peanut coating machine, clean the pan.
The Parameters of Commercial Peanut Coating Machine
|Name||Dia. Of pot||Rotating Speed||Power||Capacity||Size|
|Coating Machine||800-1200mm||28r/min||0.75 kw||10-30 kg/time||1400*1200*1500 mm|
If you are interested with our automatic peanut coating machine,please contact with me!